Wireless Setup for Mac OS 10.4.

This is a step-by-step walkthrough of the process of setting up a Mac for wireless access on the Valparaiso University campus.

You'll need to:
A) make sure that your Airport wireless card is enabled.
B) Connect to the campus wireless network (SSID "valpo").
C) Install and run the Cisco Clean Access Agent.
D) Install and run the Cisco VPN client (only required for access to services other than the web).
* The "Clean Access" login is required before the VPN client can login.
** The native Apple VPN client is not supported at this time.


Open System Preferences and select "Network"
step2

Choose your Airport interface and click "Configure..."
step3

If the lower-left lock is locked, click it and enter your administrator password. Then click "Options..." to configure your network options.
step4

If you leave the "By default, join" option set at automatic, it should find the wireless network named "valpo." A slightly-more-secure option is to only allow your computer to join "Prefered Networks."
step5

Enter the Network Name "valpo" in the preferred networks setup. This name is also known as the SSID. Click "OK".
step6

The setup with "Preferred networks" should look like this. Click the "Apply Now" button. You can close this window.
step7

If you click on the Airport icon on the menu bar, it should indicate the status of your Airport card.
step8

Next, open Safari. Any web page you try to access will be redirected to a "Clean Access" login.
Download the clean access software when prompted.
Click here for instruction on installing the Clean Access Agent.

Once you are connected to the network with the CCAAgent, you will be able to access Web resources. SSH ports are also open (if that means anything to you.)

Before you can do other useful things with the network (like email or ftp), you'll need the VPN client.
Go to the IT web page to download that.
step13

Select the version appropriate to your operating system.
step14

Download it.
step15

It should load pretty quickly.
step16

Mount the disk image by clicking "continue" when prompted.
step17

Click the red box icon to launch the VPN installer.
step18

Wade through the installer. Select your hard drive when prompted.
step19

And it's installed. (No need to reboot or anything. That's only for PC's.)
step20

You'll find the "VPNClient" in your "Applications" folder. You'll probably want to drag it to the dock to make it easier to launch when needed.
step21

Launch the VPN client and click "Connect."
step22

Enter your LDAP username and password when prompted. (That's the same username/password you use for email, coursevu, and a few things like that.)
step23

You've now got full network access. Do note that the VPN client will give an unhelpful error message if you try to run it before you login through a web browser. Remember: Login to the CCAAgent and THEN run VPN and login again.
step1
Share and enjoy.
Updated: 24 August 2007 - PMN